Aluminum Stem For Bicycle Made With Precision CNC Machining
About Product :
The stem is the component on a bicycle that connects the handlebars to the steerer tube of the bicycle fork, However, the stem has a significant effect on your bike’s geometry and, as a result, the handling and your ride position. From its length to angle, there are a lot to consider with the material used and compatible to the handlebar and steerer tube.
This time we use CNC machining for the new Stem fabrication.
About The Technical Sheet :
Aluminum 7075 T6 CNC
Handlebar diameter: 31.8 mm
Length: 50 mm OR 35 mm
Angle: 0°
Weight: 170 grams in 50mm
150 grams in 35mm
Service:
CNC machining, Tapping.
About The Project：
7075 aluminum and fully CNC machined, it is available in two different lengths (35mm and 50mm), for handlebars with a diameter of 31.8mm. With an optimized handlebar width, we have paid attention to the rigidity of this stem in order to provide you with the best sensations and ultimate precision.
Summary:
Bicycle part is not the same as others, they need to be very accurate size, the material of
strength and reliable, as well as the minimum rate of fault tolerance, can accurate calculation
results, in the precision manufacturing, the accuracy of the experiment is particularly important and to meet the satisfaction of customer, This is also one of the important driving forces for us as a supplier to continuously
improve the precision of processing.
Cooperation:
If you need help with your next project, please contact us for a free quote or directly inquire to sales@www.steprapid.com, project review, and
hope to have the opportunity to cooperate.